Huco Reducing Bush 253.15, 3mm Shaft Diameter, 6.35mm Outside Diameter

RS Stock No.: 689-114Brand: HucoManufacturers Part No.: 253.15
brand-logo
View all in Reducing Bushes

Technical documents

Specifications

Brand

Huco

Shaft Diameter

3mm

Outside Diameter

6.35mm

Length

6.6mm

Material

Brass

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+60°C

Country of Origin

United Kingdom

Product details

Bore reducers

These bore reducers are designed for use with universal joints, nickel bellows seals and shaft couplings.
They allow the bore diameter to be adjusted, increasing the range of diameters available.
When fitted to hubs with a stop screw, the reducers act as an annular flange, so no marks are left on the shaft.
Shafts can be removed or repositioned repeatedly without touching the reducers, which remain in the hubs.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Huco Reducing Bush 253.15, 3mm Shaft Diameter, 6.35mm Outside Diameter

2

Available in multiples of 2
2P.O.A.
4P.O.A.
6P.O.A.
8P.O.A.
10P.O.A.
12P.O.A.
14P.O.A.
16P.O.A.
18P.O.A.
20P.O.A.
22P.O.A.
24P.O.A.
26P.O.A.
28P.O.A.
30P.O.A.

P.O.A.

Huco Reducing Bush 253.15, 3mm Shaft Diameter, 6.35mm Outside Diameter
Stock information temporarily unavailable.

2

Available in multiples of 2
2P.O.A.
4P.O.A.
6P.O.A.
8P.O.A.
10P.O.A.
12P.O.A.
14P.O.A.
16P.O.A.
18P.O.A.
20P.O.A.
22P.O.A.
24P.O.A.
26P.O.A.
28P.O.A.
30P.O.A.

Technical documents

Specifications

Brand

Huco

Shaft Diameter

3mm

Outside Diameter

6.35mm

Length

6.6mm

Material

Brass

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+60°C

Country of Origin

United Kingdom

Product details

Bore reducers

These bore reducers are designed for use with universal joints, nickel bellows seals and shaft couplings.
They allow the bore diameter to be adjusted, increasing the range of diameters available.
When fitted to hubs with a stop screw, the reducers act as an annular flange, so no marks are left on the shaft.
Shafts can be removed or repositioned repeatedly without touching the reducers, which remain in the hubs.