INA HK0609B 6mm I.D Drawn Cup Needle Roller Bearing, 10mm O.D

RS Stock No.: 137-1722Brand: INAManufacturers Part No.: HK0609B
brand-logo
View all in Roller Bearings

Technical documents

Specifications

Brand

INA

Inside Diameter

6mm

Outside Diameter

10mm

Roller Bearing Type

Drawn Cup Needle

Race Width

8mm

Bore Type

Parallel

Material

Steel

Static Load Rating

2600N

Cage Material

Sheet Steel

Number of Rows

1

Dynamic Load Rating

2850N

End Type

Open

Limiting Speed

36500rpm

Reference Speed

30500rpm

Fatigue Limit Load

310N

Maximum Speed - Grease

21900rpm

Maximum Speed - Oil

36500rpm

Product details

Drawn Cup Needle Roller Bearings

INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.

Features and Benefits

• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise

Product Application Information

These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.

Suffixes

2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole

INA

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

INA HK0609B 6mm I.D Drawn Cup Needle Roller Bearing, 10mm O.D

P.O.A.

INA HK0609B 6mm I.D Drawn Cup Needle Roller Bearing, 10mm O.D
Stock information temporarily unavailable.

Technical documents

Specifications

Brand

INA

Inside Diameter

6mm

Outside Diameter

10mm

Roller Bearing Type

Drawn Cup Needle

Race Width

8mm

Bore Type

Parallel

Material

Steel

Static Load Rating

2600N

Cage Material

Sheet Steel

Number of Rows

1

Dynamic Load Rating

2850N

End Type

Open

Limiting Speed

36500rpm

Reference Speed

30500rpm

Fatigue Limit Load

310N

Maximum Speed - Grease

21900rpm

Maximum Speed - Oil

36500rpm

Product details

Drawn Cup Needle Roller Bearings

INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.

Features and Benefits

• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise

Product Application Information

These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.

Suffixes

2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole

INA