INA HK1010B 10mm I.D Drawn Cup Needle Roller Bearing, 14mm O.D
Technical documents
Specifications
Brand
INAInside Diameter
10mm
Outside Diameter
14mm
Roller Bearing Type
Drawn Cup Needle
Race Width
10mm
Bore Type
Parallel
Material
Steel
Static Load Rating
5100N
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
4400N
End Type
Open
Limiting Speed
24300rpm
Reference Speed
18700rpm
Maximum Speed - Grease
14600rpm
Maximum Speed - Oil
24300rpm
Fatigue Limit Load
650N
Product details
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole
INA
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
INAInside Diameter
10mm
Outside Diameter
14mm
Roller Bearing Type
Drawn Cup Needle
Race Width
10mm
Bore Type
Parallel
Material
Steel
Static Load Rating
5100N
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
4400N
End Type
Open
Limiting Speed
24300rpm
Reference Speed
18700rpm
Maximum Speed - Grease
14600rpm
Maximum Speed - Oil
24300rpm
Fatigue Limit Load
650N
Product details
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.
Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs
• Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides
RS - Contact seal on one side
ZW - Double row design, with lubrication hole