Phoenix Contact 4-Way PTTB 4-PE Earth Terminal Block, 0.2 → 6mm², 24 → 10 AWG Wire, Push In, Polyamide
Technical documents
Specifications
Brand
Phoenix ContactEarth Block Type
PTTB 4-PE
Wire Size
24 → 10 AWG
Cable CSA
0.2 → 6mm²
Colour
Green/Yellow
Number Of Ways
4
Termination Method
Push In
Housing Material
Polyamide
Length
83.5mm
Width
6.2mm
Height
55mm
Maximum Operating Temperature
+130°C
Hazardous Area Certification
ATEX, IECEx
Minimum Operating Temperature
-60°C
Country of Origin
China
Product details
PT 4 Feed-Through and Multi-Conductor Terminal Blocks
50% less insertion force
Compact design and front connection facilitate wiring in the smallest of spaces
Tool-free wiring of conductors with ferrules or solid conductors
Stranded conductors with ferrules can be inserted directly with PIT 2,5 (from 0.34 mm2) and PIT 4 (from 0.5 mm2)
Actuation lever opens the terminal point, so there is no direct contact with live parts
Double bridge shaft enables individual potential distribution and supply
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
Phoenix ContactEarth Block Type
PTTB 4-PE
Wire Size
24 → 10 AWG
Cable CSA
0.2 → 6mm²
Colour
Green/Yellow
Number Of Ways
4
Termination Method
Push In
Housing Material
Polyamide
Length
83.5mm
Width
6.2mm
Height
55mm
Maximum Operating Temperature
+130°C
Hazardous Area Certification
ATEX, IECEx
Minimum Operating Temperature
-60°C
Country of Origin
China
Product details
PT 4 Feed-Through and Multi-Conductor Terminal Blocks
50% less insertion force
Compact design and front connection facilitate wiring in the smallest of spaces
Tool-free wiring of conductors with ferrules or solid conductors
Stranded conductors with ferrules can be inserted directly with PIT 2,5 (from 0.34 mm2) and PIT 4 (from 0.5 mm2)
Actuation lever opens the terminal point, so there is no direct contact with live parts
Double bridge shaft enables individual potential distribution and supply
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.