Reliance Water Controls Stainless Steel Stopcock, 1/2in

RS Stock No.: 794-8426Brand: Reliance Water ControlsManufacturers Part No.: XVES050900
brand-logo
View all in Stopcocks

Technical documents

Specifications

Connection 1

1/2 in BSP Male

Body Material

Stainless Steel

For Use With

Cold Water, Hot Water

Operating Pressure

5bar

Connection Gender 1

Male

Pipe Size 1

1/2in

Operating Temperature Range

-10 → +99 °C

Country of Origin

Italy

Product details

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Maximum temperature: 99゚C
Minimum temperature: -10゚C
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter

Approvals

WRAS Approved

Expansion Vessels

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Reliance Water Controls Stainless Steel Stopcock, 1/2in

P.O.A.

Reliance Water Controls Stainless Steel Stopcock, 1/2in
Stock information temporarily unavailable.

Technical documents

Specifications

Connection 1

1/2 in BSP Male

Body Material

Stainless Steel

For Use With

Cold Water, Hot Water

Operating Pressure

5bar

Connection Gender 1

Male

Pipe Size 1

1/2in

Operating Temperature Range

-10 → +99 °C

Country of Origin

Italy

Product details

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Maximum temperature: 99゚C
Minimum temperature: -10゚C
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter

Approvals

WRAS Approved

Expansion Vessels