Round Leaded Gunmetal Metal Tube, 2in OD, 1in ID, 13in L, 2in W, 1in Thickness

RS Stock No.: 181-9445Brand: RS PRO
brand-logo
View all in Metal Tubes

Technical documents

Specifications

Brand

RS Pro

Tube Form

Round

Material

Leaded Gunmetal

Length

13in

Width

2in

Inner Diameter

1in

Thickness

1in

Outer Diameter

2in

Hardness

65 HB

Suitability

Bearings, Bushings, Gears, Piston Rings, Pumps

Density

0.322lb/in³

Tensile Strength

241 Mpa

Thermal Conductivity

33.6Btu

Country of Origin

United Kingdom

Product details

Leaded Gunmetal, (Cast Lead Bronze)

A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths

Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)

Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Round Leaded Gunmetal Metal Tube, 2in OD, 1in ID, 13in L, 2in W, 1in Thickness

P.O.A.

Round Leaded Gunmetal Metal Tube, 2in OD, 1in ID, 13in L, 2in W, 1in Thickness
Stock information temporarily unavailable.

Technical documents

Specifications

Brand

RS Pro

Tube Form

Round

Material

Leaded Gunmetal

Length

13in

Width

2in

Inner Diameter

1in

Thickness

1in

Outer Diameter

2in

Hardness

65 HB

Suitability

Bearings, Bushings, Gears, Piston Rings, Pumps

Density

0.322lb/in³

Tensile Strength

241 Mpa

Thermal Conductivity

33.6Btu

Country of Origin

United Kingdom

Product details

Leaded Gunmetal, (Cast Lead Bronze)

A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths

Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)

Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.