Hengstler SIGNO 721 Counter, 5 Digit LCD, 60kHz, 12 → 30 V dc
Technical documents
Specifications
Brand
HengstlerSupply Voltage
12 → 30 V dc
Count Mode
Impulses
Display Type
LCD
Function
Counter
Input Type
Voltage
Connection Type
Plug, Screw
Reset Method
Automatic, Manual
Number Of Digits
5
Mounting Type
DIN Rail
Output / Interface
Relay
Digit Height
12 mm
Backlighting
Yes
Maximum Count Frequency
60kHz
Minimum Operating Temperature
0°C
Series
SIGNO 721
Weight
200g
Maximum Operating Temperature
+50°C
Distrelec Product Id
30325986
Country of Origin
Germany
Product details
Preset Counter - Signo 721.2
Single or dual preset counter
IP65 rated
Counting Operating modes -one channel add or subtract; Direction mode; differential mode (add/sub); totalizing mode (add/add); phase discriminator
Programmable reset back to 0 or back to preset 2 (externally resettable)
Overwriting of counter reading is possible
Keylock can be absolute or separately set to allow correction and/or prescaler
Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz
Approvals
UL, CSA
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
HengstlerSupply Voltage
12 → 30 V dc
Count Mode
Impulses
Display Type
LCD
Function
Counter
Input Type
Voltage
Connection Type
Plug, Screw
Reset Method
Automatic, Manual
Number Of Digits
5
Mounting Type
DIN Rail
Output / Interface
Relay
Digit Height
12 mm
Backlighting
Yes
Maximum Count Frequency
60kHz
Minimum Operating Temperature
0°C
Series
SIGNO 721
Weight
200g
Maximum Operating Temperature
+50°C
Distrelec Product Id
30325986
Country of Origin
Germany
Product details
Preset Counter - Signo 721.2
Single or dual preset counter
IP65 rated
Counting Operating modes -one channel add or subtract; Direction mode; differential mode (add/sub); totalizing mode (add/add); phase discriminator
Programmable reset back to 0 or back to preset 2 (externally resettable)
Overwriting of counter reading is possible
Keylock can be absolute or separately set to allow correction and/or prescaler
Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz
Approvals
UL, CSA
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.