Technical documents
Specifications
Number of Channels
1
Schmitt Trigger Input
Yes
Propagation Delay Test Condition
15pF
Polarity
Non-Inverting
Minimum Operating Temperature
-55 °C
Pin Count
5
Logic Function
Buffer
Maximum High Level Output Current
-32mA
Mounting Type
Surface Mount
Maximum Operating Temperature
+125 °C
Maximum Low Level Output Current
32mA
Input Type
Single Ended
Logic Family
NL
Minimum Operating Supply Voltage
1.65 V
Width
1.35mm
Height
1mm
Maximum Operating Supply Voltage
5.5 V
Length
2.2mm
Package Type
SC-88A
Maximum Propagation Delay Time @ Maximum CL
12 ns @ 15 pF
Dimensions
2.2 x 1.35 x 1mm
Brand
ON SemiconductorProduct details
SPM6530 Series Magnetically Shielded Wire Wound Inductors
SPM6530 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"
TDK Non Standard SMT Inductors (Chokes)
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Standard
200
P.O.A.
Standard
200
Technical documents
Specifications
Number of Channels
1
Schmitt Trigger Input
Yes
Propagation Delay Test Condition
15pF
Polarity
Non-Inverting
Minimum Operating Temperature
-55 °C
Pin Count
5
Logic Function
Buffer
Maximum High Level Output Current
-32mA
Mounting Type
Surface Mount
Maximum Operating Temperature
+125 °C
Maximum Low Level Output Current
32mA
Input Type
Single Ended
Logic Family
NL
Minimum Operating Supply Voltage
1.65 V
Width
1.35mm
Height
1mm
Maximum Operating Supply Voltage
5.5 V
Length
2.2mm
Package Type
SC-88A
Maximum Propagation Delay Time @ Maximum CL
12 ns @ 15 pF
Dimensions
2.2 x 1.35 x 1mm
Brand
ON SemiconductorProduct details
SPM6530 Series Magnetically Shielded Wire Wound Inductors
SPM6530 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"