Technical documents
Specifications
Brand
SF DetectionGases Detected
Carbon Monoxide
Application
Domestic Environments
Meter Type
Wall Mounted
Audible Alarm
Yes
Visual Alarm
Yes
Power Source
Battery
Battery Type
9V
Dimensions
170 x 110 x 65mm
Weight
575g
Minimum Operating Temperature
-5°C
Height
65mm
Model Number p
SF340E
Width
110mm
Maximum Operating Temperature
+40°C
Length
170mm
Country of Origin
United Kingdom
Product details
SF340 Carbon Monoxide Detectors
The SF340 series of CO detectors are designed for fixed and permanent installations, officially approved and kite-marked to BS7860 - the British standard for domestic CO alarms.They incorporate a unique module replacement system. There are no re-wiring or main unit replacement costs - just a simple, clip-in module to change once every 5 years. This results in low ownership costs and minimal maintenance. Optional locking screws also ensure that only authorised persons can gain access to the unit.
Battery backup - each unit offers up to 5 years battery backup for continuous protection, even in the event of power loss
Uses advanced electrochemical sensing technology, specially developed for detection of CO at low concentration without being adversely affected by other gases, household agents or environmental changes
Continuously monitors the environment for CO and provides an audible and visual alarm when concentration reaches 150ppm - the alarms continue if the gas remains at a dangerous level
An internal diagnostic facility means the SF340 carries out continuous self-monitoring. If any fault is located in the sensor, battery or circuits, the unit will automatically give a warning signal within 60 seconds
Complete 10 year guarantee on the main unit and a full 5 year guarantee on each sensor module
Relay/interconnect option available, enabling connection to control panels, shut-off valves, remote alarms etc. This also allows numbers of alarms to be linked together in series
SF340E - 230V, 50Hz standard model
SF340F - 230V, 50Hz relay output model (for relay and interconnect feature)
Supplied with
Installation kit and full fitting/operational instructions.
Gas Detection: Carbon Monoxide Detection
Carbon Monoxide is a deadly toxic gas that has no smell and cannot be seen or tasted. Its presence is lethal causing death and injury, it can be caused by poorly installed or maintained heating appliances, chimneys, flues and gas fired cooking appliances.,Even low levels of CO can impair judgement and greatly increase risk of accidents and injury in motorists and machine operators. See "key characteristics" table for details of carbon monoxide level and their effects.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
SF DetectionGases Detected
Carbon Monoxide
Application
Domestic Environments
Meter Type
Wall Mounted
Audible Alarm
Yes
Visual Alarm
Yes
Power Source
Battery
Battery Type
9V
Dimensions
170 x 110 x 65mm
Weight
575g
Minimum Operating Temperature
-5°C
Height
65mm
Model Number p
SF340E
Width
110mm
Maximum Operating Temperature
+40°C
Length
170mm
Country of Origin
United Kingdom
Product details
SF340 Carbon Monoxide Detectors
The SF340 series of CO detectors are designed for fixed and permanent installations, officially approved and kite-marked to BS7860 - the British standard for domestic CO alarms.They incorporate a unique module replacement system. There are no re-wiring or main unit replacement costs - just a simple, clip-in module to change once every 5 years. This results in low ownership costs and minimal maintenance. Optional locking screws also ensure that only authorised persons can gain access to the unit.
Battery backup - each unit offers up to 5 years battery backup for continuous protection, even in the event of power loss
Uses advanced electrochemical sensing technology, specially developed for detection of CO at low concentration without being adversely affected by other gases, household agents or environmental changes
Continuously monitors the environment for CO and provides an audible and visual alarm when concentration reaches 150ppm - the alarms continue if the gas remains at a dangerous level
An internal diagnostic facility means the SF340 carries out continuous self-monitoring. If any fault is located in the sensor, battery or circuits, the unit will automatically give a warning signal within 60 seconds
Complete 10 year guarantee on the main unit and a full 5 year guarantee on each sensor module
Relay/interconnect option available, enabling connection to control panels, shut-off valves, remote alarms etc. This also allows numbers of alarms to be linked together in series
SF340E - 230V, 50Hz standard model
SF340F - 230V, 50Hz relay output model (for relay and interconnect feature)
Supplied with
Installation kit and full fitting/operational instructions.
Gas Detection: Carbon Monoxide Detection
Carbon Monoxide is a deadly toxic gas that has no smell and cannot be seen or tasted. Its presence is lethal causing death and injury, it can be caused by poorly installed or maintained heating appliances, chimneys, flues and gas fired cooking appliances.,Even low levels of CO can impair judgement and greatly increase risk of accidents and injury in motorists and machine operators. See "key characteristics" table for details of carbon monoxide level and their effects.