Texas Instruments SN75116N, LVDS Transceiver, 16-Pin PDIP

RS Stock No.: 660-9164Brand: Texas InstrumentsManufacturers Part No.: SN75116NIMPA: 0
brand-logo
View all in LVDS Interface Ics

Technical documents

Specifications

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

0 °C

Pin Count

16

Mounting Type

Through Hole

Manufacturer Part No.

82-6552.1000

Width

6.35mm

Height

4.57mm

Length

19.3mm

Package Type

PDIP

Dimensions

19.3 x 6.35 x 4.57mm

Product details

Flying leads adaptor for USB-II Platform Cable, Xilinx

The adaptor makes possible to use flying wires for connections to distributed terminals on a target system.
The adaptor is a small circuit board with two connectors.
The connector on the bottom side of the adapter mates with the 14-pin Platform Cable USB II male 2-mm connector. A 7-pin right-angle header on the top side of the adapter mates with the standard Xilinx flying wire set.
Flying Leads : Provide pins on your printed circuit board for your desired configuration mode. For example, Boundary-Scan configuration would require VCC, GND, TCK, TDO, TDI and TMS header pins. Each lead is labeled to identify the proper pin connection.

Programmable Logic Programming

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Texas Instruments SN75116N, LVDS Transceiver, 16-Pin PDIP
Select packaging type

P.O.A.

Texas Instruments SN75116N, LVDS Transceiver, 16-Pin PDIP
Stock information temporarily unavailable.
Select packaging type

Buy in bulk

quantityUnit price
5 - 120P.O.A.
125 - 495P.O.A.
500 - 1245P.O.A.
1250 - 2495P.O.A.
2500+P.O.A.

Technical documents

Specifications

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

0 °C

Pin Count

16

Mounting Type

Through Hole

Manufacturer Part No.

82-6552.1000

Width

6.35mm

Height

4.57mm

Length

19.3mm

Package Type

PDIP

Dimensions

19.3 x 6.35 x 4.57mm

Product details

Flying leads adaptor for USB-II Platform Cable, Xilinx

The adaptor makes possible to use flying wires for connections to distributed terminals on a target system.
The adaptor is a small circuit board with two connectors.
The connector on the bottom side of the adapter mates with the 14-pin Platform Cable USB II male 2-mm connector. A 7-pin right-angle header on the top side of the adapter mates with the standard Xilinx flying wire set.
Flying Leads : Provide pins on your printed circuit board for your desired configuration mode. For example, Boundary-Scan configuration would require VCC, GND, TCK, TDO, TDI and TMS header pins. Each lead is labeled to identify the proper pin connection.

Programmable Logic Programming