ITW Devcon Composite Welder Blue, Green 250 ml Epoxy Adhesive Cartridge for Metal, Plastic
Technical documents
Specifications
Brand
ITW DevconMaterial Compatibility
Metal, Plastic
Colour
Blue, Green
Package Type
Cartridge
Package Size
250 ml
Setting Time
20min
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+121°C
Trade Name
Composite Welder
Cure Time
16 h
Flame Retardant
Yes
Shear Strength
2000 → 2800 psi
Operating Temperature Range
-40 → +250 °C
Country of Origin
Ireland
Product details
Composite Welder
Two part methacrylate adhesive designed for the structural bonding of thermoplastic, thermoset, metal and composites.
Minimal surface preparation required
Fills gaps and variations in bond surfaces up to 10mm
Fast fix/curing times
Bonds thermoplastics, thermoset,metals and composite assemblies
Superior flexibility, impact and fatigue resistant
Working time is 4-6mins, fixture time is 15-18 minutes
Manual applicator gun required, see stock no. 495-1750
For mixer nozzles required, see stock no. 375-925
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 5 | P.O.A. |
| 6 - 11 | P.O.A. |
| 12+ | P.O.A. |
Technical documents
Specifications
Brand
ITW DevconMaterial Compatibility
Metal, Plastic
Colour
Blue, Green
Package Type
Cartridge
Package Size
250 ml
Setting Time
20min
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+121°C
Trade Name
Composite Welder
Cure Time
16 h
Flame Retardant
Yes
Shear Strength
2000 → 2800 psi
Operating Temperature Range
-40 → +250 °C
Country of Origin
Ireland
Product details
Composite Welder
Two part methacrylate adhesive designed for the structural bonding of thermoplastic, thermoset, metal and composites.
Minimal surface preparation required
Fills gaps and variations in bond surfaces up to 10mm
Fast fix/curing times
Bonds thermoplastics, thermoset,metals and composite assemblies
Superior flexibility, impact and fatigue resistant
Working time is 4-6mins, fixture time is 15-18 minutes
Manual applicator gun required, see stock no. 495-1750
For mixer nozzles required, see stock no. 375-925
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.