Technical documents
Specifications
Polarised
Polar
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
Lead Pitch
2mm
Diameter
5mm
USB Version
USB2.0
Lifetime
1000h
Tolerance
±20%
Dissipation Factor
10%
Voltage
63V dc
Length
11mm
Capacitance
4.7µF
Height
11mm
Series
RS
Dimensions
5 (Dia.) x 11mm
Ripple Current
34mA
Brand
RS ProCountry of Origin
Taiwan, Province Of China
Product details
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Works solely with the EL-WiFi range of sensors
Detects alarm triggers from all EL-WiFi sensors
Audible alarm with built-in speaker (SPL 100dBA @ 1m)
Flashing red LEDs light up through translucent red rear moulding
Functions at all times, including when PC turned off
Easy set-up using free PC software application
Configurable alert tones and volume
Auto mute
Signal strength indicator
Protection rating IP55
Firmware upgradeable via USB
Supported Security Protocols WEP, WPA/WPA2-PSK
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Standard
100
P.O.A.
Standard
100
Technical documents
Specifications
Polarised
Polar
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
Lead Pitch
2mm
Diameter
5mm
USB Version
USB2.0
Lifetime
1000h
Tolerance
±20%
Dissipation Factor
10%
Voltage
63V dc
Length
11mm
Capacitance
4.7µF
Height
11mm
Series
RS
Dimensions
5 (Dia.) x 11mm
Ripple Current
34mA
Brand
RS ProCountry of Origin
Taiwan, Province Of China
Product details
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Works solely with the EL-WiFi range of sensors
Detects alarm triggers from all EL-WiFi sensors
Audible alarm with built-in speaker (SPL 100dBA @ 1m)
Flashing red LEDs light up through translucent red rear moulding
Functions at all times, including when PC turned off
Easy set-up using free PC software application
Configurable alert tones and volume
Auto mute
Signal strength indicator
Protection rating IP55
Firmware upgradeable via USB
Supported Security Protocols WEP, WPA/WPA2-PSK
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11