Texas Instruments,40 W @ 8 Ω, 11-Pin MLPP LM2876TF/NOPB

RS Stock No.: 145-7433Brand: Texas InstrumentsManufacturers Part No.: LM2876TF/NOPBIMPA: 0
brand-logo
View all in Audio Amplifier ICs

Technical documents

Specifications

Connector Type

FTP, UTP

Amplifier Type

Audio Power Amplifier

Power Supply Type

Single

Output Signal Type

Single Ended

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-20 °C

Pin Count

11

Mounting Type

Surface Mount

Minimum CMRR

75dB

Input Signal Type

Single Ended

Typical Gain Bandwidth Product

8MHz

Maximum Power

40 W @ 8 Ω

Typical Single Supply Voltage

20 → 60 V

Package Type

MLPP

Dimensions

20.02 x 10.64 x 4.5mm

Country of Origin

Malaysia

Product details

SD-card format WiFi board

The SPB104 is a complete WLAN card for evaluation and development of the 802.11b/g standard compliant WiFi component HDG104 from H&D Wireless. This highly integrated solution is optimized for customer applications running on a host CPU. The host interface supports SDIO and SPI. Internal RAM comprises both code and data memory eliminating the need for external RAM, Flash or ROM memory interfaces. Baseband firmware, FW, is stored on the host and downloaded at start up. MAC address, trimming values etc are stored in the on board EEPROM.

Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps
Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK
WEP and AES hardware encryption accelerator up to 128bit
On-chip RF filter for the ISM band 2.4GHz
Internal 32kHz oscillator maintains real time in power save mode
DMA hardware support for data flow to reduce CPU load
Uses Ultra Low Power (ULP) technology
On-board 160KB SRAM and 1KB EEPROM
Internal Boot-ROM
Advanced power management for optimum power consumption at varying load.
External interfaces including SDIO and SPI
Supply voltage: +2.75 to +3.6V

WLAN (Wireless Local Area Network) - H & D Wireless

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Texas Instruments,40 W @ 8 Ω, 11-Pin MLPP LM2876TF/NOPB

P.O.A.

Texas Instruments,40 W @ 8 Ω, 11-Pin MLPP LM2876TF/NOPB
Stock information temporarily unavailable.

Technical documents

Specifications

Connector Type

FTP, UTP

Amplifier Type

Audio Power Amplifier

Power Supply Type

Single

Output Signal Type

Single Ended

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-20 °C

Pin Count

11

Mounting Type

Surface Mount

Minimum CMRR

75dB

Input Signal Type

Single Ended

Typical Gain Bandwidth Product

8MHz

Maximum Power

40 W @ 8 Ω

Typical Single Supply Voltage

20 → 60 V

Package Type

MLPP

Dimensions

20.02 x 10.64 x 4.5mm

Country of Origin

Malaysia

Product details

SD-card format WiFi board

The SPB104 is a complete WLAN card for evaluation and development of the 802.11b/g standard compliant WiFi component HDG104 from H&D Wireless. This highly integrated solution is optimized for customer applications running on a host CPU. The host interface supports SDIO and SPI. Internal RAM comprises both code and data memory eliminating the need for external RAM, Flash or ROM memory interfaces. Baseband firmware, FW, is stored on the host and downloaded at start up. MAC address, trimming values etc are stored in the on board EEPROM.

Data Rates: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps
Modulation: QPSK, 16QAM, 64QAM DBPSK, DQPSK, CCK, OFDM with BPSK
WEP and AES hardware encryption accelerator up to 128bit
On-chip RF filter for the ISM band 2.4GHz
Internal 32kHz oscillator maintains real time in power save mode
DMA hardware support for data flow to reduce CPU load
Uses Ultra Low Power (ULP) technology
On-board 160KB SRAM and 1KB EEPROM
Internal Boot-ROM
Advanced power management for optimum power consumption at varying load.
External interfaces including SDIO and SPI
Supply voltage: +2.75 to +3.6V

WLAN (Wireless Local Area Network) - H & D Wireless