Turck Inductive Block Proximity Sensor, PNP NO, 10 → 30 V dc
Technical documents
Specifications
Brand
TurckSensor Technology
Inductive
Body Style
Block
Output Function
NO
Digital Switching Output Type
PNP
Cable Length
2m
Connection Type
Pre-Cabled
Supply Voltage
10 → 30 V dc
Length
30mm
IP Rating
IP67
Mounting Type
Non-Flush
Housing Material
PA12-GF30
Width
28mm
Maximum dc Voltage
30V
Minimum Operating Temperature
-25°C
Shielding
Unshielded
Maximum Switching Frequency
1kHz
Switching Current
200 mA
Reverse Polarity Protection
Yes
Switching Frequency
1 kHz
Series
BIM-AKT
Short Circuit Overload Protection
Yes
Depth
15mm
Maximum Operating Temperature
+70°C
Product details
Turck BIM-AKT Series Magnetic Field Sensors
The BIM-AKT series are activated by magnetic fields making them ideally suited for detecting piston positions in pneumatic cylinders. As magnetic fields can permeate non-magnetized metals, these units can detect the position of a piston with a permanently mounted magnet through the aluminium wall of the cylinder. They are made even more versatile thanks to having a wide voltage range of 10 to 65 Vdc. A yellow LED indicates the switching state making it easier to monitor.
Rectangular, height 15mm
Concentric active face
Increased sensitivity
DC 2-wire, 10 to 65 Vdc
Non-contact
Cable connection
IP67
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
TurckSensor Technology
Inductive
Body Style
Block
Output Function
NO
Digital Switching Output Type
PNP
Cable Length
2m
Connection Type
Pre-Cabled
Supply Voltage
10 → 30 V dc
Length
30mm
IP Rating
IP67
Mounting Type
Non-Flush
Housing Material
PA12-GF30
Width
28mm
Maximum dc Voltage
30V
Minimum Operating Temperature
-25°C
Shielding
Unshielded
Maximum Switching Frequency
1kHz
Switching Current
200 mA
Reverse Polarity Protection
Yes
Switching Frequency
1 kHz
Series
BIM-AKT
Short Circuit Overload Protection
Yes
Depth
15mm
Maximum Operating Temperature
+70°C
Product details
Turck BIM-AKT Series Magnetic Field Sensors
The BIM-AKT series are activated by magnetic fields making them ideally suited for detecting piston positions in pneumatic cylinders. As magnetic fields can permeate non-magnetized metals, these units can detect the position of a piston with a permanently mounted magnet through the aluminium wall of the cylinder. They are made even more versatile thanks to having a wide voltage range of 10 to 65 Vdc. A yellow LED indicates the switching state making it easier to monitor.
Rectangular, height 15mm
Concentric active face
Increased sensitivity
DC 2-wire, 10 to 65 Vdc
Non-contact
Cable connection
IP67