Technical documents
Specifications
Brand
Wurth ElektronikCapacitance
1500µF
Voltage
6.3V dc
Mounting Type
Through Hole
Technology
Polymer
Dimensions
10 (Dia.) x 12.5mm
Height
12.5mm
Minimum Operating Temperature
-55°C
Diameter
10mm
Maximum Operating Temperature
+125°C
Lifetime
2000h
Lead Pitch
5mm
Leakage Current
945 μA
Tolerance
±20%
Equivalent Series Resistance
9mΩ
Series
WCAP-PTHT
Ripple Current
6.64A
Dissipation Factor
10
Product details
Wurth Elektronik General Purpose WCAP-PTHT Capacitor Series 125°C
Aluminium Polymer capacitors contain solid conductive polymer instead of wet electrolytic thus the benefits are:
High permissible ripple current due to lower ESR at high frequency range
Higher long term stability and expected life
No dry out phenomenon due to solid conductive polymer
WCAP-PTHT Series are high temperature polymer electrolytic capacitors
Low ESR at high frequency range
Operating temperature: -55°C to +125°C
Load life of 2000h @ +125°C
Wave soldering is recommended
Stock information temporarily unavailable.
Please check again later.
P.O.A.
2
P.O.A.
2
Technical documents
Specifications
Brand
Wurth ElektronikCapacitance
1500µF
Voltage
6.3V dc
Mounting Type
Through Hole
Technology
Polymer
Dimensions
10 (Dia.) x 12.5mm
Height
12.5mm
Minimum Operating Temperature
-55°C
Diameter
10mm
Maximum Operating Temperature
+125°C
Lifetime
2000h
Lead Pitch
5mm
Leakage Current
945 μA
Tolerance
±20%
Equivalent Series Resistance
9mΩ
Series
WCAP-PTHT
Ripple Current
6.64A
Dissipation Factor
10
Product details
Wurth Elektronik General Purpose WCAP-PTHT Capacitor Series 125°C
Aluminium Polymer capacitors contain solid conductive polymer instead of wet electrolytic thus the benefits are:
High permissible ripple current due to lower ESR at high frequency range
Higher long term stability and expected life
No dry out phenomenon due to solid conductive polymer
WCAP-PTHT Series are high temperature polymer electrolytic capacitors
Low ESR at high frequency range
Operating temperature: -55°C to +125°C
Load life of 2000h @ +125°C
Wave soldering is recommended