Technical documents
Specifications
Brand
John DrummondTest Current Rating
3.5mA
Output Voltage
50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
Calibrated
RSCAL
Power Source
Mains
Dimensions
213 x 112 x 72mm
Weight
320g
Height
72mm
Length
213mm
Maximum Operating Temperature
+55°C
Minimum Operating Temperature
-10°C
Width
112mm
Country of Origin
Philippines
Product details
Drummond MTL10 Test Lamp and Proving Unit Safety Kit
Voltage level indicator & proving unit safety kit comprising:
MTL10 Drummond Test Lamp
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electricians test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
PD440 Proving Unit:
Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
Supplied with
Handy carry case, right angled probe tip, two straight tips and instructions
Mains Voltage Indicators - Contact
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Calibration type
RS Calibration
1
P.O.A.
Calibration type
RS Calibration
1
Technical documents
Specifications
Brand
John DrummondTest Current Rating
3.5mA
Output Voltage
50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
Calibrated
RSCAL
Power Source
Mains
Dimensions
213 x 112 x 72mm
Weight
320g
Height
72mm
Length
213mm
Maximum Operating Temperature
+55°C
Minimum Operating Temperature
-10°C
Width
112mm
Country of Origin
Philippines
Product details
Drummond MTL10 Test Lamp and Proving Unit Safety Kit
Voltage level indicator & proving unit safety kit comprising:
MTL10 Drummond Test Lamp
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electricians test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
PD440 Proving Unit:
Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
Supplied with
Handy carry case, right angled probe tip, two straight tips and instructions