Microchip Xplained Pro Zigbit Extension Board Evaluation Kit ATZB-A-233-XPRO

RS Stock No.: 130-6945Brand: MicrochipManufacturers Part No.: ATZB-A-233-XPRO
brand-logo

Technical documents

Specifications

RF Technology

Extension Board

Classification

Expansion Board

Kit Classification

Evaluation Kit

Technology

Extension Board

Kit Name

Xplained Pro Zigbit

Product details

ZigBit 2.4GHz AT86RF233 Amplified Extension Board

The Atmel ZigBit™ extension board ATZB-A-233-XPRO supports the AT86RF233 Amplified wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.

ZigBit 2.4GHz AT86RF233 Amplified Module
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for monitoring ZigBit current
ZigBit reset pushbutton

ZigBit ATZB-RF-233-1-C Amplified module
AT86RF233 2.4GHz ISM-Band Transceiver chip with SE2431L RF Front End Module (FEM)
RF Output Power: Up to +20dBm
Receiver sensitivity: -104dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Range: Up to 2000m (open space)
128byte FIFO Tx/Rx buffer
Host communication: serial SPI
Built-in chip antenna
MS-147 RF test connector
Power supply: +2.0 to +3.6Vdc
Dimensions: 25 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Microchip Xplained Pro Zigbit Extension Board Evaluation Kit ATZB-A-233-XPRO

P.O.A.

Microchip Xplained Pro Zigbit Extension Board Evaluation Kit ATZB-A-233-XPRO
Stock information temporarily unavailable.

Technical documents

Specifications

RF Technology

Extension Board

Classification

Expansion Board

Kit Classification

Evaluation Kit

Technology

Extension Board

Kit Name

Xplained Pro Zigbit

Product details

ZigBit 2.4GHz AT86RF233 Amplified Extension Board

The Atmel ZigBit™ extension board ATZB-A-233-XPRO supports the AT86RF233 Amplified wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.

ZigBit 2.4GHz AT86RF233 Amplified Module
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for monitoring ZigBit current
ZigBit reset pushbutton

ZigBit ATZB-RF-233-1-C Amplified module
AT86RF233 2.4GHz ISM-Band Transceiver chip with SE2431L RF Front End Module (FEM)
RF Output Power: Up to +20dBm
Receiver sensitivity: -104dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Range: Up to 2000m (open space)
128byte FIFO Tx/Rx buffer
Host communication: serial SPI
Built-in chip antenna
MS-147 RF test connector
Power supply: +2.0 to +3.6Vdc
Dimensions: 25 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)