Molex Premise Networks ST to ST Duplex Multi Mode OM1 Fibre Optic Cable, 62.5/125μm, Orange, 2m
Technical documents
Specifications
Connector 1
ST
Length
2m
Propagation Mode
Multi Mode
Connector 2
ST
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Sheath Colour
Orange
Cable Construction
Duplex
Fibre Type
OM1
Maximum Operating Temperature
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Series
91
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 14 | P.O.A. |
| 15+ | P.O.A. |
Technical documents
Specifications
Connector 1
ST
Length
2m
Propagation Mode
Multi Mode
Connector 2
ST
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Sheath Colour
Orange
Cable Construction
Duplex
Fibre Type
OM1
Maximum Operating Temperature
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Series
91
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3