Technical documents
Specifications
Brand
OsramOutput Voltage
38 → 120V
Maximum Output Power
45W
Output Current
100 mA, 700 mA
Input Voltage
195 → 264 V
Operation
Constant Current
AC or DC Input Voltage
AC
IP Rating
IP20
Series
OPTOTRONIC OT
Voltage Rating
195 → 264V
Product details
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Current output range: 100 to 700mA
Control of current setting via DIP switch and LEDset interface
Very low switch on current
Future proof and flexible current setting
Consistently high efficiency
SELV equivalent
Suitable for indoor applications including OLED lighting panels
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
OsramOutput Voltage
38 → 120V
Maximum Output Power
45W
Output Current
100 mA, 700 mA
Input Voltage
195 → 264 V
Operation
Constant Current
AC or DC Input Voltage
AC
IP Rating
IP20
Series
OPTOTRONIC OT
Voltage Rating
195 → 264V
Product details
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Current output range: 100 to 700mA
Control of current setting via DIP switch and LEDset interface
Very low switch on current
Future proof and flexible current setting
Consistently high efficiency
SELV equivalent
Suitable for indoor applications including OLED lighting panels