Phoenix Contact 1 Channel Analogue Signal Transmitter With Analogue Output, 125 V dc, 253 V ac max, 7.4mA max

RS Stock No.: 751-1386Brand: Phoenix ContactManufacturers Part No.: 2865751
brand-logo
View all in Zener & Galvanic Barriers

Technical documents

Specifications

Number of Channels

1

Barrier Type

Galvanic Barrier

Maximum Voltage

125 V dc, 253V ac

Hazardous Area Certification

ATEX

Maximum Operating Temperature

+65°C

Supply Voltage

24 → 230V ac/dc

Maximum Current

7.4mA

Minimum Operating Temperature

-20°C

Series

MACX MCR-EX-T-UIREL-UP

Operating Temperature Range

-20 → +65°C

Country of Origin

Germany

Product details

MACX MCR-EX-T Series Signal Conditioners

Programmable Ex-i temperature transducer with analog output and 1 limit value relay
Standard configuration
Resistance thermometer in two, three, or four wire technology
Galvanic isolation
Wide range power supply
Spring cage connection

Warning

For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary.
For a safe parallel connection the use of the normally closed contacts of both relays at the termination points 2.4 and 2.5 respectively 3.4 and 3.5 is mandatory

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Phoenix Contact 1 Channel Analogue Signal Transmitter With Analogue Output, 125 V dc, 253 V ac max, 7.4mA max

P.O.A.

Phoenix Contact 1 Channel Analogue Signal Transmitter With Analogue Output, 125 V dc, 253 V ac max, 7.4mA max
Stock information temporarily unavailable.

Technical documents

Specifications

Number of Channels

1

Barrier Type

Galvanic Barrier

Maximum Voltage

125 V dc, 253V ac

Hazardous Area Certification

ATEX

Maximum Operating Temperature

+65°C

Supply Voltage

24 → 230V ac/dc

Maximum Current

7.4mA

Minimum Operating Temperature

-20°C

Series

MACX MCR-EX-T-UIREL-UP

Operating Temperature Range

-20 → +65°C

Country of Origin

Germany

Product details

MACX MCR-EX-T Series Signal Conditioners

Programmable Ex-i temperature transducer with analog output and 1 limit value relay
Standard configuration
Resistance thermometer in two, three, or four wire technology
Galvanic isolation
Wide range power supply
Spring cage connection

Warning

For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary.
For a safe parallel connection the use of the normally closed contacts of both relays at the termination points 2.4 and 2.5 respectively 3.4 and 3.5 is mandatory