Technical documents
Specifications
Brand
Phoenix ContactInput Range
0 → 4000 Ω, -200 → +850°C
Mounting Type
DIN Rail
Operating Temperature Range
-20 → +65°C
Series
3RS70
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Country of Origin
Germany
Product details
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.
Features and benefits:
- Easily configurable by accessible DIP switches or a programmer
- Approved for zone 2 installation (nA)
- Easy error diagnostics with simple red LED
- 2,3 and 4 wire connection method
- Pt, Ni and Cu sensor type
Accessories:
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
Phoenix ContactInput Range
0 → 4000 Ω, -200 → +850°C
Mounting Type
DIN Rail
Operating Temperature Range
-20 → +65°C
Series
3RS70
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Country of Origin
Germany
Product details
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.
Features and benefits:
- Easily configurable by accessible DIP switches or a programmer
- Approved for zone 2 installation (nA)
- Easy error diagnostics with simple red LED
- 2,3 and 4 wire connection method
- Pt, Ni and Cu sensor type