SKF HK 1212 12 mm I.D Roller Bearing Needle, 18 mm O.D
Technical documents
Specifications
Brand
SKFProduct Type
Roller Bearing
Inside Diameter
12 mm
Race Width
12mm
Bore Type
Parallel
Cage Material
Sheet Steel
Number of Rows
1
Static Load Rating
7.35kN
Outside Diameter
18 mm
Dynamic Load Rating
6.27kN
End Type
Open
Standards/Approvals
No
Maximum Speed - Oil
20000rpm
Maximum Speed - Grease
14000rpm
Limiting Speed
18000rpm
Bearing Type
Needle
Country of Origin
Slovakia
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
P.O.A.
1
P.O.A.
Stock information temporarily unavailable.
1
Stock information temporarily unavailable.
| quantity | Unit price |
|---|---|
| 1 - 5 | P.O.A. |
| 6 - 24 | P.O.A. |
| 25+ | P.O.A. |
Technical documents
Specifications
Brand
SKFProduct Type
Roller Bearing
Inside Diameter
12 mm
Race Width
12mm
Bore Type
Parallel
Cage Material
Sheet Steel
Number of Rows
1
Static Load Rating
7.35kN
Outside Diameter
18 mm
Dynamic Load Rating
6.27kN
End Type
Open
Standards/Approvals
No
Maximum Speed - Oil
20000rpm
Maximum Speed - Grease
14000rpm
Limiting Speed
18000rpm
Bearing Type
Needle
Country of Origin
Slovakia
Product details
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required