TE Connectivity Right Angle 222K1 Black, Fluid Resistant Elastomer, 43 mm
Technical documents
Specifications
Brand
TE ConnectivitySub Type
Right Angle
Product Type
Heat Shrink Boot
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrink Temperature
90°C
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
150°C
Maximum Shrunk Diameter
28.2mm
Minimum Shrunk Diameter
9.9mm
Maximum Inside Diameter
43mm
Minimum Inside Diameter
43mm
Standards/Approvals
No
Series
222K1
Adhesive Backing
No
Country of Origin
Czech Republic
Product details
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Stock information temporarily unavailable.
P.O.A.
1
P.O.A.
Stock information temporarily unavailable.
1
| quantity | Unit price |
|---|---|
| 1 - 14 | P.O.A. |
| 15 - 49 | P.O.A. |
| 50 - 99 | P.O.A. |
| 100 - 249 | P.O.A. |
| 250+ | P.O.A. |
Technical documents
Specifications
Brand
TE ConnectivitySub Type
Right Angle
Product Type
Heat Shrink Boot
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrink Temperature
90°C
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
150°C
Maximum Shrunk Diameter
28.2mm
Minimum Shrunk Diameter
9.9mm
Maximum Inside Diameter
43mm
Minimum Inside Diameter
43mm
Standards/Approvals
No
Series
222K1
Adhesive Backing
No
Country of Origin
Czech Republic
Product details
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.