Technical documents
Specifications
Brand
InfineonOutput Current
10mA
Input Voltage
-0.3 → 27 V
AC or DC Input Voltage
DC
Dimming Operation
PWM
Application
LED Luminaries, LED Replacements Lamps
Number of Pins
8
Maximum Output Voltage
27V
Minimum Output Voltage
-0.3V
Current Rating
5mA
Series
ICL
Country of Origin
Taiwan, Province Of China
Product details
ICL8002G Off-line LED Driver IC
The Infineon ICL8002G is an offline LED driver IC part of the ICL series supporting dimming levels down to 1%. It is a highly integrated LED driver with primary side control that reduces the number of required components and simplifies design. A low-cost bleeder circuit supports great dimmer compatibility for mainstream single stage non-isolated buck or isolated flyback topologies. Typical applications are LED replacements lamps (e.g. A-bulb, linear tubes) or LED luminaires (e.g. downlights, spotlights).
Features
Supports single stage PFC/quasi resonant flyback and PFC/floating buck topology
Integrated HV start-up cell for short time to light
Comprehensive protection features
Optimised for phase-cut dimming compatibility
High efficiency up to 90%
Good line and load regulation capabilities
Power factor up to 98% with low THD (<20%)
Smooth dimming curve with high dimmer compatibility
Primary side control with high accuracy
Integrated power cell for short time to light
Built-in digital soft-start
Isolation Voltage: 1250 Vac to 3750 Vac
Operating Temp.: -40°C to +125°C
LED Drivers, Infineon
Stock information temporarily unavailable.
Please check again later.
P.O.A.
2500
P.O.A.
2500
Technical documents
Specifications
Brand
InfineonOutput Current
10mA
Input Voltage
-0.3 → 27 V
AC or DC Input Voltage
DC
Dimming Operation
PWM
Application
LED Luminaries, LED Replacements Lamps
Number of Pins
8
Maximum Output Voltage
27V
Minimum Output Voltage
-0.3V
Current Rating
5mA
Series
ICL
Country of Origin
Taiwan, Province Of China
Product details
ICL8002G Off-line LED Driver IC
The Infineon ICL8002G is an offline LED driver IC part of the ICL series supporting dimming levels down to 1%. It is a highly integrated LED driver with primary side control that reduces the number of required components and simplifies design. A low-cost bleeder circuit supports great dimmer compatibility for mainstream single stage non-isolated buck or isolated flyback topologies. Typical applications are LED replacements lamps (e.g. A-bulb, linear tubes) or LED luminaires (e.g. downlights, spotlights).
Features
Supports single stage PFC/quasi resonant flyback and PFC/floating buck topology
Integrated HV start-up cell for short time to light
Comprehensive protection features
Optimised for phase-cut dimming compatibility
High efficiency up to 90%
Good line and load regulation capabilities
Power factor up to 98% with low THD (<20%)
Smooth dimming curve with high dimmer compatibility
Primary side control with high accuracy
Integrated power cell for short time to light
Built-in digital soft-start
Isolation Voltage: 1250 Vac to 3750 Vac
Operating Temp.: -40°C to +125°C