Technical documents
Specifications
Electrolyte Type
Solid
Tolerance Minus
-20%
Minimum Operating Temperature
-55°C
Tolerance Plus
+20%
Lead Diameter
0.5mm
Maximum Operating Temperature
+125°C
Terminal Type
Through Hole
Technology
MnO2
Mounting Type
Through Hole
Diameter
8mm
Lead Pitch
5mm
Tolerance
±20%
Voltage
25V dc
Dissipation Factor
8%
Equivalent Series Resistance
1.2Ω
Height
13mm
Capacitance
33µF
Leakage Current
6.6 μA
Series
TAP
Trade Name
Fast Release PenetrantDimensions
8 (Dia.) x 13mm
Product details
RS Multipower LED Driver MP 80 Slim HV Series
The MP 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 80 Slim HV is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.
Driver for built-in use
Multi-power driver with dip-switch
It can be used for lighting equipment in protection class I and II
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads
Approvals
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
Stock information temporarily unavailable.
Please check again later.
P.O.A.
500
P.O.A.
500
Technical documents
Specifications
Electrolyte Type
Solid
Tolerance Minus
-20%
Minimum Operating Temperature
-55°C
Tolerance Plus
+20%
Lead Diameter
0.5mm
Maximum Operating Temperature
+125°C
Terminal Type
Through Hole
Technology
MnO2
Mounting Type
Through Hole
Diameter
8mm
Lead Pitch
5mm
Tolerance
±20%
Voltage
25V dc
Dissipation Factor
8%
Equivalent Series Resistance
1.2Ω
Height
13mm
Capacitance
33µF
Leakage Current
6.6 μA
Series
TAP
Trade Name
Fast Release PenetrantDimensions
8 (Dia.) x 13mm
Product details
RS Multipower LED Driver MP 80 Slim HV Series
The MP 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 80 Slim HV is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.
Driver for built-in use
Multi-power driver with dip-switch
It can be used for lighting equipment in protection class I and II
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads
Approvals
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384