TE Connectivity FLEXSTRIP Series Ribbon Cable, 10-Way, 2.54mm Pitch
Technical documents
Specifications
Brand
TE ConnectivityPitch
2.54mm
Number of Ways
10
American Wire Gauge
24
Series
FLEXSTRIP
Hi-Flex
Yes
Minimum Operating Temperature
-40°C
Voltage Rating
300 V
Maximum Operating Temperature
+125°C
Operating Temperature Range
-40 → +125 °C
Characteristic Impedance
117 Ω
High Density
Yes
Capacitance
11.2pF/ft
Product details
Jumper Leads
FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications.
The product can be repeatably flexed without failure, reliable vibration- and break proof connection
No long preparation times for connecting PCBs, no cutting into sections, no preliminary work
Can be installed by most commonly used soldering techniques
High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | P.O.A. |
| 5 - 9 | P.O.A. |
| 10 - 49 | P.O.A. |
| 50 - 99 | P.O.A. |
| 100+ | P.O.A. |
Technical documents
Specifications
Brand
TE ConnectivityPitch
2.54mm
Number of Ways
10
American Wire Gauge
24
Series
FLEXSTRIP
Hi-Flex
Yes
Minimum Operating Temperature
-40°C
Voltage Rating
300 V
Maximum Operating Temperature
+125°C
Operating Temperature Range
-40 → +125 °C
Characteristic Impedance
117 Ω
High Density
Yes
Capacitance
11.2pF/ft
Product details
Jumper Leads
FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications.
The product can be repeatably flexed without failure, reliable vibration- and break proof connection
No long preparation times for connecting PCBs, no cutting into sections, no preliminary work
Can be installed by most commonly used soldering techniques
High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously